Katana Construction Journal
- BFenix
- Pooplord
- Posts: 4112
- Joined: Wed Jan 06, 2010 2:13 pm
- Location: City Of Ravens (Lisbon)
- Contact:
Katana Construction Journal
Hi there everyone, Im off to a new project to improve my skills in wood crafting. Has you might have already guessed, Im building myself a katana.
The truth about these projects is that you waste money and end up with a prop that is actually useless, but I honestly don't care.
Heres a good reference pic I found on the internet with all the original names for the katana parts:
For a premier, I went yesterday to good hardware shop near my place and bought the wood required for this. Gladly, my dad id fond of all sorts of bricolage, so I don't have to buy any power tools. (I hope I don't lose a finger or two in this process)
Heres what I got:
These were once one big panel, I then sent it to get cut into six 120x10x1cm MDF planks. MDF is a type of wood that is very resistant and yet, also very workable and easy to shape and sculpt. Also, I had six planks, so if I mess up I can have a back up, six backups actually If Im a total loser in wood crafting...
I have my (dads) tools ready:
Having all these tools is very neat and all but I have to actually draw all the parts and blade. I now need ideas for the tsuba, I have some skecthes but some help from you guys would help <a href='http://tinyurl.com/y42zurt'>alot</a>!
Ill keep this updated, C&C is most welcome!
PS: don't worry Oloth, Im not working on this all the time, Sin stuff is still in progress.
The truth about these projects is that you waste money and end up with a prop that is actually useless, but I honestly don't care.
Heres a good reference pic I found on the internet with all the original names for the katana parts:
For a premier, I went yesterday to good hardware shop near my place and bought the wood required for this. Gladly, my dad id fond of all sorts of bricolage, so I don't have to buy any power tools. (I hope I don't lose a finger or two in this process)
Heres what I got:
These were once one big panel, I then sent it to get cut into six 120x10x1cm MDF planks. MDF is a type of wood that is very resistant and yet, also very workable and easy to shape and sculpt. Also, I had six planks, so if I mess up I can have a back up, six backups actually If Im a total loser in wood crafting...
I have my (dads) tools ready:
Having all these tools is very neat and all but I have to actually draw all the parts and blade. I now need ideas for the tsuba, I have some skecthes but some help from you guys would help <a href='http://tinyurl.com/y42zurt'>alot</a>!
Ill keep this updated, C&C is most welcome!
PS: don't worry Oloth, Im not working on this all the time, Sin stuff is still in progress.
- Olothontor
- Clown-Face Bologna
- Posts: 2193
- Joined: Fri Dec 14, 2007 9:29 pm
- Location: Lounging in a commercial Starliner of his own design.
- Contact:
- masterMISICK
- Officer
- Posts: 161
- Joined: Thu Apr 01, 2010 2:38 pm
- Location: london
Love the idea i made a sword a bit like this some time ago it is extremely hard and takes a very long time if you want it looking good. Also you are going to find it even harder using hand held power tools, try and see if some one you know has a band saw makes the cutting much easier, another thing don't try to sand paper the edge of the blade into a cutting edge it does not work and looks irregular and messy. MDF is a good chose of wood but make sure you clean it up after working with it because it tends to go a bit fuzzy.
But over all good luck I also painted mine so if you want to know what DOES not work and I also did the handle, oh and one more thing try and make it all in one peace it really helps with the strength, my friend made one as well but in two peaces and tried slotting the blade into the handle but it snapped.
But over all good luck I also painted mine so if you want to know what DOES not work and I also did the handle, oh and one more thing try and make it all in one peace it really helps with the strength, my friend made one as well but in two peaces and tried slotting the blade into the handle but it snapped.
I like to look my enemy in the face through a high powered sniper rifle 2 miles away
Sorry for my boneriffic inability to spell.
Sorry for my boneriffic inability to spell.
- Olothontor
- Clown-Face Bologna
- Posts: 2193
- Joined: Fri Dec 14, 2007 9:29 pm
- Location: Lounging in a commercial Starliner of his own design.
- Contact:
I'm no expert, but it seems that each plank of MDF there is a "just in case" measure after the first, meaning that only one plank is suppose to become a sword. If he wants to properly construct the tsuba, making the whole blade out of one piece is out of the question.
For better protection, and for a nicer look, you could finish and polish it once you complete it. Or are you planning on flat out painting it (use a clear matte coat or varnish in that case; keeps the paint from stripping off).
For better protection, and for a nicer look, you could finish and polish it once you complete it. Or are you planning on flat out painting it (use a clear matte coat or varnish in that case; keeps the paint from stripping off).
- BFenix
- Pooplord
- Posts: 4112
- Joined: Wed Jan 06, 2010 2:13 pm
- Location: City Of Ravens (Lisbon)
- Contact:
I will, primary, secondary and varnishOlothontor wrote:I'm no expert, but it seems that each plank of MDF there is a "just in case" measure after the first, meaning that only one plank is suppose to become a sword. If he wants to properly construct the tsuba, making the whole blade out of one piece is out of the question.
For better protection, and for a nicer look, you could finish and polish it once you complete it. Or are you planning on flat out painting it (use a clear matte coat or varnish in that case; keeps the paint from stripping off).
- BFenix
- Pooplord
- Posts: 4112
- Joined: Wed Jan 06, 2010 2:13 pm
- Location: City Of Ravens (Lisbon)
- Contact:
Alright! yesterday I drew the katana on the MDF and a cut it out. I must confess, it ended up with lots of bumps and imperfections. Yet today, I spent the whole morning sanding it. And It went pretty well, I think its really neat
But pictures say more then words, so check it out!
Next step will be making the handle and tsuba, keep in touch! C&C and ideas for the tsuba are very welcome!
But pictures say more then words, so check it out!
Next step will be making the handle and tsuba, keep in touch! C&C and ideas for the tsuba are very welcome!
- Olothontor
- Clown-Face Bologna
- Posts: 2193
- Joined: Fri Dec 14, 2007 9:29 pm
- Location: Lounging in a commercial Starliner of his own design.
- Contact:
- BFenix
- Pooplord
- Posts: 4112
- Joined: Wed Jan 06, 2010 2:13 pm
- Location: City Of Ravens (Lisbon)
- Contact:
I agree, and my saw can't make very tight curves, it must be slightly blocky. Of course it will look WAY better when sandedOlothontor wrote: At this stage, I would definitely not suggest something complex for the Tsuba, but you could always go for one of the 'classical' Tsuba styles:
The blade looks great so far. Keep it up!
- naussica
- Dimmy
- Posts: 569
- Joined: Sat Feb 20, 2010 5:27 pm
- Location: doing what you see in my avatar
It's looking good BF!
My youtube channel:
http://www.youtube.com/user/naussica21
http://www.erepublik.com/en/referrer/naussica
http://www.youtube.com/user/naussica21
http://www.erepublik.com/en/referrer/naussica
- BFenix
- Pooplord
- Posts: 4112
- Joined: Wed Jan 06, 2010 2:13 pm
- Location: City Of Ravens (Lisbon)
- Contact:
Hello dear follower. Another important page in this journal.
Yesterday, I applied wood glue to the Tsuka (handle) and glued on the two parts that complete it.
Today, sanding began, again. I spent lots of time sanding the Tsuka and the hilt, since its was completely blocky and it had a few bits coming out, including a bit of glue excess.
But hard work is always rewarded, and I got this pretty satisfying results:
NOTE: A lesson to you all! When wielding a REAL blade, NEVER touch the sharp edge for the obvious reason that you might get cut, but also, the simple act of touching it makes you put sweat in it, leaving it blunt. Believe me, I learned this from a weapon masters in a medieval fair.
Now remains making the Tsuba and painting. Also covering the Tsuka with some cloth. Also some minor refining. Stay tuned for more
Yesterday, I applied wood glue to the Tsuka (handle) and glued on the two parts that complete it.
Today, sanding began, again. I spent lots of time sanding the Tsuka and the hilt, since its was completely blocky and it had a few bits coming out, including a bit of glue excess.
But hard work is always rewarded, and I got this pretty satisfying results:
NOTE: A lesson to you all! When wielding a REAL blade, NEVER touch the sharp edge for the obvious reason that you might get cut, but also, the simple act of touching it makes you put sweat in it, leaving it blunt. Believe me, I learned this from a weapon masters in a medieval fair.
Now remains making the Tsuba and painting. Also covering the Tsuka with some cloth. Also some minor refining. Stay tuned for more
- Colonel-Kermit
- Officer
- Posts: 140
- Joined: Sun Sep 05, 2010 12:06 pm
- Location: Sesame Street
- warman45
- Cannon Fodder
- Posts: 468
- Joined: Mon Nov 24, 2008 10:52 pm
- Location: missisauga ontario (GTA!!)
- Contact:
looks like you won't need to pay income tax, or cable, or realy anyhting anymore! cool sword!
<img src="http://www.heresy-online.net/daemons/ad ... /24408.gif" alt="Broken Adoptable Image"><br><a href="http://www.heresy-online.net/daemons/le ... gurath.htm" title="Level up this Daemon!">Level up Adoptable!</a>
- RagnarokRose
- u a MILLION wus and only then shall you become the MISTRESS
- Posts: 3941
- Joined: Sun Sep 21, 2008 7:03 pm
- aoffan23
- You can nail me with your wood. ( ͡° ͜ʖ ͡°)
- Posts: 2702
- Joined: Sat Jan 23, 2010 7:41 pm
- Location: Ottawa
Damn, that's way better than I expected from just wood.
Are you planning on making 5 more out of the backup planks you have? That way, you could make an awesome fight scene with friends, and then post it here to show the awesomeness.
Also, are you planning on painting it to make it look like a real katana, or are you keeping just plain wood, or maybe stain it?
Are you planning on making 5 more out of the backup planks you have? That way, you could make an awesome fight scene with friends, and then post it here to show the awesomeness.
Also, are you planning on painting it to make it look like a real katana, or are you keeping just plain wood, or maybe stain it?
Spoiler
Show
Tzan wrote:I agree with Warhead.Quantumsurfer wrote:I generally agree with TzanWarhead wrote:I agree with QuantumSmurfer.