Page 1 of 1
Need help with spaceship design!
Posted: Mon Jul 16, 2018 3:56 pm
by Diamondsword901
So, I built a spaceship, and I started putting stuff inside. I have a lunchroom, bridge, secondary bridge, and engineering, but I have probably a 16x16 inch space and a 8x16 that need stuff in them. What should I do?
Re: Need help with spaceship design!
Posted: Mon Jul 16, 2018 3:57 pm
by Falk
Some pictures would be a good place to start
Re: Need help with spaceship design!
Posted: Mon Jul 16, 2018 4:11 pm
by Kommander Ken
Re: Need help with spaceship design!
Posted: Mon Jul 16, 2018 6:16 pm
by Diamondsword901
Kommander Ken wrote:
Thanks! I am putting bricks for a onboard fighter repair bay
Re: Need help with spaceship design!
Posted: Tue Jul 17, 2018 12:10 am
by ninja_bait
Kommander Ken wrote:
Is it this one?
http://brikwars.com/forums/viewtopic.ph ... 35#p352435
Is the carrier bay also complete? I like the spaceship repair bay. You may consider a reception hall or meeting room in the 8x16 space. A good flagship should be able to host a couple dignitaries so you can kidnap and/or assassinate them and then start a
Re: Need help with spaceship design!
Posted: Tue Jul 17, 2018 8:11 am
by Diamondsword901
ninja_bait wrote:Kommander Ken wrote:
Is it this one?
http://brikwars.com/forums/viewtopic.ph ... 35#p352435
Is the carrier bay also complete? I like the spaceship repair bay. You may consider a reception hall or meeting room in the 8x16 space. A good flagship should be able to host a couple dignitaries so you can kidnap and/or assassinate them and then start a
Yep, but it is 80 inches now
Re: Need help with spaceship design!
Posted: Tue Jul 17, 2018 10:38 am
by Kommander Ken
